SCULPFUN S9 Full Metal Ultra-fine Laser Engraving Machine Wood Laser

Dear customers, please note the following: In principle, return policy only applies to situations caused by mis-delivery of goods. We will not currently provide returns if you change mind due to personal reasons or accessories are missing or defective after receiving the goods. Don't worry,  if relevant valid certificates can be provided, we will spare no effort to provide you with accessory replacement services. Please contact me if you have any questions, usually you will get a reply within 24 hours, except Saturdays, Sundays and holidays Please pay attention when purchasing. Product Description Higher Accuracy DIY Laser Cutter and Engraver Machine Best Desktop High Power DIY Laser Cutter and Engraver Machine for business starters, hobbyists, designers, artists, home-makers, professionals. Better technologies (industrialized steel wheel&shaft, tension wheel, synchronous belt, Compressed light spot,etc.) makes the carving more precise and the carved works perfect. More humanized designs, you can concentrate on your creation all the time. 90w Effect Laser Beam Shaping Technology To get a super high density energy laser beam, S9 uses the latest 5.5W laser beam shaping technology with 0.06*0.06mm ultra-fine laser spot, which has powerful cutting ability and precise carving ability. Super Cutting Penetration S9 has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, easily carve ceramics and stainless steel. Ultra-thin Engraving Line Professional test pattern and film ruler show that the S9 engraving line is only 0.08mm, thinner than a hair. This means that S9 can engrave more precise, clear, and delicate objects. Longer Service Life Using imported chips and circuits motherboard, structure, technology has been optimized, built-in fan cooling system, the module will not heat up even after working a long time, improving the service life. Fast Focusing Design S9 combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete focusing. No tools needed, fast and easy. New Eye Protection Design The laser filter filters 98% of UV light into your eyes. You and those around you can watch laser engraving without goggles. It also prevents animals from catching the laser spot. 【High Precision & Superb Penetration】SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm thick plywood, 10mm thick dark acrylic, engraved ceramics, and stainless steel. 【Safety Protection Design】The laser cutter and engraving machine are equipped with a very convenient power switch, which is not available in others. The laser filter cover filters 98% of the UV light to the eyes, you can watch laser engraving without wearing goggles and prevent animals from catching the laser spot. Comes with a steel pad that can protect the table from laser damage, and isolate fire hazards. 【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL (free), LightBurn (paid), Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Mac system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. (You can view the software operation tutorial in the video) 【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole structure is designed for easy assembly, and the assembly can be completed in 10-20 minutes. The structural frame is very durable and remains open to upgrading. Or replace the longer extension kit to expand the engraving area to 410*950mm (additional purchase required). 【Fast Focusing & Quality Assurance】The S9 laser engraving combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing. This makes it very easy to use the laser. If you have any problem with our product, please freely contact us. Specification : Product model: SCULPFUN S9 Engraving size: 410*420mm / 16.1*16.5in Color: Blue Plug mode: US plug Engraving material: wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, dark stone. Cutting material: wood, acrylic board, cardboard, non-woven fabric, bamboo, some plastic board. Laser effect power: 90W (similar to 90W COz laser cutting effect) Power consumption: 30W Diode laser output power: 5.5-6W Laser wavelength: 455±5nm Engraving accuracy: 0.01mm Focusing mode: fixed focus laser + sliding device Laser protection cover: the purple filter cover on the laser can protect the user's eyes and prevent animals from contacting the laser point. Operating software: for LaserGRBL, for LightBurn, for LaserGRBL, for LightBurn, for Benbox, for GrblController, for LiteFire, Support Windows and MAC operating systems. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data transfer mode: USB connection Power supply: International standard power input: 100-240V AC, 50/60Hz Output: 12V 5A Net weight of equipment: 3.0kg Packing weight: 4.4kg Packing size: 615*345*130mm / 24.2*13.6*5.1in Certification: CE FCC RoHS FDA ICE certification Matters needing attention: 1. For detailed machine instructions and parameter settings, please refer to the manual. 2. Install laser protective cover when operating laser engraving machine; Wear goggles if not properly installed. 3. Do not touch the laser with your hands. Otherwise, your hands may be burned. 4. Please avoid strong impact on the machine. 5. Children under 14 years of age are not allowed to use this product. Adult supervision is required for children over 14 years of age. 6. Do not apply the laser directly to any specular reflection object, this may cause injury to the operator or burn the laser. Notes : Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-3mm measuring deviation due to manual measurement. Packing list: 1 x X- axis component 2 x X profiles 2 x Y profiles 1 x Control box component 3 x Supporting leg 1 x Laser component 1 x 12V 5A power adapter 1 x Power cord 1 x USB cable 1 x Step 1-5 screw mounting kit 2 x Belt 1 x T-type M5 Hexagon socket screwdriver 1 x L-type M4 Hexagon socket screwdriver 1 x L-type M3 Hexagon socket screwdriver 1 x 8-10mm screw wrench 10 x Ribbon 1 x Brush 1 x Laser protective goggles 1 x 3mm thick 10x10cm wood chip 1 x 10mm thick 10x10cm wood chip 1 x A4 size steel tabletop protective pad

Returns Accepted for this item if it's within 30 Days